9.11.7 Operation principle SEMOD175737-4 v5The Boolean 16 to integer conversion function (B16I) will transfer a combinationof up to 16 binary inputs INx, where 1≤x≤16, to an integer. Each INx represents avalue according to the table below from 0 to 32768. This follows the generalformula: INx = 2x-1 where 1≤x≤16. The sum of all the values on the activated INxwill be available on the output OUT as a sum of the integer values of all the inputsINx that are activated. OUT is an integer. When all INx (where 1≤x≤16) areactivated, that is = Boolean 1, it corresponds to that integer 65535 is available onthe output OUT. The B16I function is designed for receiving up to 16 booleansinput locally. If the BLOCK input is activated, it will freeze the output at the lastvalue.Values of each of the different OUTx from function block B16I for 1≤x≤16.The sum of the value on each INx corresponds to the integer presented on theoutput OUT on the function block B16IName of input Type Default Description Value whenactivatedValue whendeactivatedIN1 BOOLEAN 0 Input 1 1 0IN2 BOOLEAN 0 Input 2 2 0IN3 BOOLEAN 0 Input 3 4 0IN4 BOOLEAN 0 Input 4 8 0IN5 BOOLEAN 0 Input 5 16 0IN6 BOOLEAN 0 Input 6 32 0IN7 BOOLEAN 0 Input 7 64 0IN8 BOOLEAN 0 Input 8 128 0IN9 BOOLEAN 0 Input 9 256 0IN10 BOOLEAN 0 Input 10 512 0IN11 BOOLEAN 0 Input 11 1024 0IN12 BOOLEAN 0 Input 12 2048 0IN13 BOOLEAN 0 Input 13 4096 0IN14 BOOLEAN 0 Input 14 8192 0IN15 BOOLEAN 0 Input 15 16384 0IN16 BOOLEAN 0 Input 16 32768 0The sum of the numbers in column “Value when activated” when all INx (where1≤x≤16) are active that is=1; is 65535. 65535 is the highest boolean value that canbe converted to an integer by the B16I function block.Section 9 1MRK 511 424-UEN BLogic330 Bay control REC650 2.2 IECTechnical manual
