13.7.12.5 SettingsPID-3790-SETTINGS v5Table 452:I103USRCMD Non group settings (basic)Name Values (Range) Unit Step Default DescriptionFunctionType 1 - 255 - 1 1 Function type (1-255)PulseMode SteadyPulsed- - Pulsed Pulse modePulseLength 0.200 - 60.000 s 0.001 0.400 Pulse lengthInfNo_1 1 - 255 - 1 1 Information number for output 1 (1-255)InfNo_2 1 - 255 - 1 2 Information number for output 2 (1-255)InfNo_3 1 - 255 - 1 3 Information number for output 3 (1-255)InfNo_4 1 - 255 - 1 4 Information number for output 4 (1-255)InfNo_5 1 - 255 - 1 5 Information number for output 5 (1-255)InfNo_6 1 - 255 - 1 6 Information number for output 6 (1-255)InfNo_7 1 - 255 - 1 7 Information number for output 7 (1-255)InfNo_8 1 - 255 - 1 8 Information number for output 8 (1-255)13.7.13 Function commands generic for IEC 60870-5-103I103GENCMD13.7.13.1 Functionality GUID-729E9AFD-0468-4BBD-B54A-A6CDCC68A9B2 v3I103GENCMD is used for transmitting generic commands over IEC 60870-5-103.The function has two outputs signals CMD_OFF and CMD_ON that can be used toimplement double-point command schemes.The I103GENCMD component can be configured as either 2 pulsed ON/OFF or 2steady ON/OFF outputs. The ON output is pulsed with a command with value 2,while the OFF output is pulsed with a command value 1. If in steady mode is ONasserted and OFF deasserted with command 2 and vice versa with command 1.Steady mode is selected by setting PulseLength=0. The I103GENCMD is retained,and a command in steady mode will be reissued on restart.13.7.13.2 IdentificationGUID-1933A30C-5214-4116-8CD3-91BD975FACED v1Function description Function blocknameIEC 60617identificationANSI/IEEE C37.2device numberFunction commands generic for IEC60870-5-103I103GENCMD - -Section 13 1MRK 511 424-UEN BStation communication572 Bay control REC650 2.2 IECTechnical manual
