13.3.6.6 Operation principle SEMOD55936-5 v7Upon receiving an analog signal at its input, Generic communication function forMeasured Value (MVGAPC) will give the instantaneous value of the signal and therange, as output values. Additional configuration is needed with PCM600 orIET600 to get the IEC 61850-8-1 communication established. For moreinformation see the Engineering manual.13.3.7 GOOSE function block to receive a double point valueGOOSEDPRCV13.3.7.1 IdentificationGUID-8C11DB9A-7844-4E1F-A6BB-D97ECE350FC1 v1Function description IEC 61850identificationIEC 60617identificationANSI/IEEE C37.2device numberGOOSE function block to receive adouble point valueGOOSEDPRCV - -13.3.7.2 Functionality GUID-1D2DBC22-4F04-4809-B34E-8939D442C185 v3GOOSEDPRCV is used to receive a double point value using IEC 61850 protocolvia GOOSE.13.3.7.3 Function block GUID-ED277880-FB5D-4630-872F-9F343D449FFE v1GOOSEDPRCVBLOCK^SRCDPOUT^DPOUTDATAVALIDCOMMVALIDTESTIEC10000249-2-en.vsdxIEC10000249 V2 EN-USFigure 237: GOOSEDPRCV function block13.3.7.4 SignalsGUID-2DC54788-86AF-4B4B-8E57-A89E30F0C433 v1Except for the BLOCK input, the rest of the inputs of this GOOSEfunction block are used for GOOSE connections. Theseconnections are visible and possible to make only if Easy GOOSEengineering is enabled. For instructions on how to enable EasyGOOSE engineering in PCM600, refer to the Engineering Manual.1MRK 511 424-UEN B Section 13Station communicationBay control REC650 2.2 IEC 495Technical manual
