Section 6: Setting Up - WindowsAXIS 5570e/AXIS 5670e User’s Manual116Adding NetBIOS/NetBEUI Printers in Windows 2000 using AXIS Print MonitorSee to it that the NetBEUI protocol is installed on your client. Followthe procedure below to install Axis Printer Ports from a Windows2000 workstation:1.To start the Add Printer Wizard, selectSettings | PrintersfromtheStartmenu and double-click theAdd Printericon. Start theinstallation by clickingNext.2.The Wizard asks you to selectLocal printerorNetwork printer.SelectLocal printer. ClickNext.3.ClickCreate a new port.In the Available Ports dialog, selectAXISPortand clickNext.4.SelectNetBIOS/NetBEUIas your choice of network protocol andclickOK.5.Select the AXIS Port you want to add from the list of available ports.The port appears as . (Example: AX100086.LP1). The is taken from the table below. ClickOK.6.Choose the appropriate printer driver for your printer. ClickNextand proceed directly to step 9. It is only necessary to perform steps7 - 8 if your printer does not appear in the list.Note:PortsavailableUSB portParallel portSerial portAXIS 5570eUSB1LPT1—AXIS 5670eLPT1LPT2COM1Even if the desired printer is available in theManufacturersandPrinterslists,you are advised to use the printer driver provided with the printer. This assuresyou of the latest driver software.