Section 3: Basic Installation AXIS 5570e/AXIS 5670e User’s Manual22Installation GuideAfter connecting the AXIS 5570e/AXIS 5670e to your network, youare now ready to perform the basic setup procedures. The method ofinstallation that you choose should be dictated by your printingrequirements and the type of network into which you are integrating.1. Start out with setting an IP address on the print server, describedin Setting the IP address, on page 24.2. Refer to the table below to determine which setup proceduresthat are relevant to your network environment.Environment DataStreamNetworkConfigurationActionsAS/400 SCS / IPDS SNA SNA Printing - 5494 Mode, on page 36SCS TN5250E (TCP/IP) TN5250E printing (SCS over IP), on page 48IPDS PPR/PPD (TCP/IP) PPR/PPD Printing - IPDS data streams, on page 51IBMMainframeSCS / IPDS SNA SNA Printing, on page 60SCS / IPDS TN3270E (TCP/IP) TCP/IP TN3270E Printing, on page 70IPDS PPR/PPD (TCP/IP) PPR/PPD Printing - IPDS data streams, on page 82NetWare TCP/IP and IPX/SPX Setting Up - NetWare, on page 123Windows98/NT/Me2000/XPTCP/IP,NetBIOS/NetBEUISetting Up - Windows, on page 101Macintosh TCP/IP, AppleTalk Setting Up - Macintosh, on page 158UNIX TCP/IP Setting Up - UNIX, on page 165
