AXIS 5570e/AXIS 5670e User’s Manual Section 10: Management and Configuration 197Viewingthe Status fileThe status command shows which printer port the logical printers areassigned to, and their current status.Follow the instructions below to view the status file using telnet:1. Log in to the AXIS 5570e/AXIS 5670e by typing:telnet or telnet in a DOSwindow (Windows and OS/2) or in a UNIX shell.2. Enter the user id and the password. (The default entries are rootand pass.)3. View the status file by typing:statusPerforming resets Three types of reset commands allow you to perform soft resets, toperform hard resets, and to reset the print server’s parameters to itsdefault settings.Follow the instructions below to perform a soft reset using telnet:1. Log in to the AXIS 5570e/AXIS 5670e by typing:telnet or telnet in a DOSwindow (Windows and OS/2) or in a UNIX shell.2. Enter the user id and the password. (The default entries are rootand pass.)3. Restart the print server’s protocols by typing:softresetReplace the command in step 3 above with hardreset or defaultto perform the other two reset operations.Printing Hexdumps The AXIS 5570e/AXIS 5670e allows you to record a trace of thecommunication between the AXIS 5570e/AXIS 5670e and the host.The AXIS 5570e/AXIS 5670e supports hexdump printing for the SNA,TN3270E, TN5250E, LPR/LPD and Raw TCP/IP printing protocols.Please refer to Product Model Summary, on page 9 for details on thesupported protocols.
