AXIS 5570e/AXIS 5670e User’s Manual Section 7: Setting Up - NetWare 155Using a Web Browser for Print Server Management, on page 86.If both the IPX and IP protocols are enabled in your network and theprint server uses DUAL_STACK (enabled by default) as its networktransport protocol, then IPX will be chosen. To force the print serverto use the IP transport protocol, go to your print server’s webinterface and choose Admin | Detailed View | NetWare and changethe NetWare Transport Protocol from DUAL_STACK to IP_ONLY. Saveand exit when finished.Note:Queue-based PrintingMethodsThe following overview explains the advantages and limitations ofthe two supported queue-based printing methods.Print Server Mode The AXIS 5570e/AXIS 5670e logs in to a file server(s) and repeatedlypolls the print queues for print jobs. In this fashion, the AXIS5570e/AXIS 5670e emulates a NetWare print server, which is aworkstation running PSERVER. It provides high printing speed withlow network load and is the recommended mode for medium to largesized networks. Each print server in PSERVER mode takes oneNetWare user license.Advantages • High performance:Limitations • In bindery mode, this printing method requires a NetWare userlicence for each AXIS 5570e/AXIS 5670e to file server link.Remote Printer Mode The AXIS 5570e/AXIS 5670e acts as Remote Printer for PSERVER.NLMrunning on the NetWare file server, or to a dedicated workstationrunning PSERVER.EXE. In this fashion, the AXIS 5570e/AXIS 5670eemulates a workstation running the NetWare remote printer softwareRPRINTER, or NPRINTER. This mode is only recommended for smallnetworks where the number of NetWare user licences is a majorissue.Pure IP requires that you run NetWare 5 or higher.
