Section 10: Management and Configuration AXIS 5570e/AXIS 5670e User’s Manual198Follow the instructions below to perform a hexdump printout for theSNA printing protocol:1. Log in to the AXIS 5570e/AXIS 5670e by typing:telnet or telnet in a DOSwindows (Windows and OS/2) or in a UNIX shell.2. Enter the user id and the password. (The default entries are rootand pass.)3. Enable the AXIS 5570e/AXIS 5670e to hexdump mode by typing:snahexdump4. Select Start Logging from the Terminal menu in the Telnetwindow. Specify a file name and select the folder where youwant to save the file.5. Start the print job.6. When the print job is finished, select Stop Logging from theTerminal menu.7. Enter the quit commandReplace the command in step 3 above with tnehexdump for theTN3270E and TN5250E protocols, lpdhexdump for the LPR/LPDprotocol, or rtnhexdump for the reverse Telnet protocol.Telnet Help By typing help in step 3 in any of the Telnet instruction sets above, alist of all available commands will be displayed.
