Section 5: Setting Up - IBM Mainframe (zSeries) AXIS 5570e/AXIS 5670e User’s Manual90The PRTnnnn parameters create JES2 default values that are usedunless other values are specified in the application program JCL. ThePRTnnnn statement contains the following parameters:PRTnnnn Statement ExplanationCKPTPAGESpecifies the number of pages between data-set checkpoints. If checkpoint intervals are too frequent, printerperformance is significantly reduced. If intervals are too infrequent, and a PSF error occurs, the job has to bereprocessed from the last checkpoint. In this case, printer performance is significantly reduced if PSF errorscontinue to occur. The recommended starting value is 100.CLASS Specifies the output classes processed by the printer. By defining print classes you can handle disabledmechanisms.FSS Specifies the FSS for this device and must match the FSA name specified in the corresponding FSS statement.This parameter is required.MARKEnables form markings to be placed on the job trailer pages. For the AXIS 5570e/AXIS 5670e you should setthis parameter to NO.Note: This parameter is new in JES2 and replaces the MARK | NOMARK parameter.MODE Specifies that the printer is managed by an FSS. This parameter is required.
