AXIS 5570e/AXIS 5670e User’s ManualSection 5: Setting Up - IBM Mainframe (zSeries) 75Verifying theCommunication:1. Activate the connection you created in step 2 of the above SNAServer - AXIS 5570e/AXIS 5670e connection procedures. Thestatus of the connection should be “active”.2. Make sure the corresponding LU in the host is activated.3. Activate the TN3270 connection to the AXIS 5570e/AXIS 5670e.The LUA should change status to SSCP.4. Check that the printer is connected to the AXIS 5570e/AXIS5670e.5. Send a print job from the host.The AXIS 5570e/AXIS 5670e is now ready for use.Notes:NetWare forSAA ServerTo set-up a TN3270E connection to the AXIS 5570e/AXIS 5670e youhave to set up PU and LU definitions. This is done by following thesteps below:1. Start the NWSAA Administrator.2. Double-click the NWSAA Node. The panel below will appear.3. Enter the Node ID for the host.• You can check the status of the TN3270E connection by printing a test pagefrom the Print Server. This is done by pressing the test button once. Makesure the TN3270E status (St:) line for your server connection is defined aseither:•SSCP•LU-1•LU-3• For additional information about configuring other TN3270E servers, referto the Technical Notes on www.axis.com
