Section 12: Upgrading the Firmware AXIS 5570e/AXIS 5670e User’s Manual236Section 12 Upgrading the FirmwareUpgrading the FirmwareYou can upgrade the AXIS 5570e/AXIS 5670e firmware using one ofthe following methods:• AXIS ThinWizard (TCP/IP)• From the print server’s internal Web pages (TCP/IP)• FTP (TCP/IP)Note:Upgrading from thePrint Server’s InternalWeb PagesFollow these instructions to upgrade the firmware of your print serverfrom its internal Web pages (flash loading over the Web):1. Open your Web browser, enter the IP address of your print serverand press Enter. (See Print Server Management, on page 85 fordetailed instructions on accessing your Axis print server on theWeb).2. From the Admin mode, click the Firmware Upgrade button. Fromhere you can upgrade your print server with the latest availablefirmware.Upgrading usingAXIS ThinWizardAXIS ThinWizard 3.0 is a tool that enables batch upgrading of severalprint servers and can be used for upgrading the print server’sfirmware in TCP/IP networks.You must assign an IP address to the print server, as described earlierin this manual, before you can use this upgrading method.Follow the instructions below to upgrade your print servers usingAXIS ThinWizard:Updating instructions are supplied with the firmware release notes.
