Section 7: Setting Up - NetWare AXIS 5570e/AXIS 5670e User’s Manual150The IP address Choose the method the AXIS 5570e/AXIS 5670e should employ forobtaining an IP address. DHCP, ARP, RARP, BOOTP and Auto-IP aresupported. You can also select to set the IP address manually. Referto Assigning an IP Address to the Print Server, on page 14 for furtherinformation about setting the IP address.Print Queues The AXIS 5570e/AXIS 5670e uses the print server name followed bythe printer port as the default Print Queue name and print server portname. If you want to change the default printer queue names, justtype the new names in the available text fields.Test Page The final user prompt in the Installation Wizard allows you to print atest page through NetWare. The test page displays the name of allthe NetWare servers the AXIS 5570e/AXIS 5670e is connected to andshows the status of each connection.Unless you want to connect or create additional printing queues, theinstallation for the NetWare environment is now completed.Notes:Advanced Installation using AXIS NetPilotHaving installed your AXIS 5570e/AXIS 5670e print server inaccordance with the basic installation procedures described in BasicSetup with AXIS NetPilot, on page 149, your AXIS 5570e/AXIS 5670eprint server should now feature in the ‘Network Print Servers’ folder• The parameters entered during installation are not permanent; they can be alteredat any time according to your network printing requirements.• No serious or permanent damage will be caused if you make a mistake duringinstallation. If you find, at any time, that printing is not satisfactory, the parame-ters can easily be changed to tune the system to your requirements.• For information on advanced functions, please refer to the AXIS Network PrintServer Technical Reference. You can download this or other technical informationover the Internet by accessing www.axis.com