Section 3: Basic Installation AXIS 5570e/AXIS 5670e User’s Manual20Connecting a printer to the Ethernet NetworkFollow the instructions below to connect a printer to the network viathe AXIS 5570e/AXIS 5670e print server.Important:1. Switch off the printer(s) and disconnect the AXIS 5570e/AXIS5670e external power supply.2. Locate the serial number, found on the backside label of the printserver, and write it down. You will need this number during thenetwork configuration.3. Connect the print server to the printer(s).4. Connect the print server to the network using a twisted pair RJ45cable (of category 5 or better).5. Switch on the printer(s) and connect the external power supplyto the AXIS 5570e/AXIS 5670e. The power indicator lights up. Ifthe network indicator starts to flash, the print server is correctlyconnected to the network.6. Press and release the test button on the print server to print atest page.If the print server is correctly connected to the printer(s), a testpage will be printed.Make sure that the AXIS 5570e/AXIS 5670e external power supply is marked withthe correct voltage!
