Section 5: Setting Up - IBM Mainframe (zSeries) AXIS 5570e/AXIS 5670e User’s Manual82PPR/PPD Printing - IPDS data streamsImportant:Before you begin In order to use the AXIS 5570e/AXIS 5670e to print IPDS data usingTCP/IP as the transport protocol, the following software must beinstalled and configured on your MVS:• PSF/MVS Version 2 release 2.0 with APAR OW15599.• MVS Scheduler APAR OW12236 to support the two new PRINT-DEV keywords: IPADDR and PORTNO.• TCP/IP version 3 release 1, or higherConfigurationProceduresThe configuration procedures presented in this section are dividedinto seven separate steps:1. Specifying the TCP/IP address space name2. Defining the MVS control unit3. Modifying the TCP/IP profile on your MVS system, if necessary4. Configuring the AXIS 5570e/AXIS 5670e5. Verifying the communication between the AXIS 5570e/AXIS5670e and the IBM Mainframe6. Defining the AXIS 5570e/AXIS 5670e as a writer-controlledprinter to JES7. Defining the printer to PSF with a PRINTDEV statement,including the IP address and port number.IPDS is only available for print server models with the IPDS option installed.Please refer to Product Model Summary, on page 9.
