AXIS 5570e/AXIS 5670e User’s Manual Section 7: Setting Up - NetWare 143Notes:Setup using iPrintiPrint is Novell's next generation of printing software that lets usersprint to and from all destinations.A standard Web page displays available printers to the user.By clicking a printer, the iPrint client is installed (if not installedpreviously), the printer's driver is downloaded, and a printer is createdin the user's Printer folder, enabling the user to send documents tothe printer from any application on the desktop.Before setting up iPrint printers, make sure that you meet all theiPrint Setup requirements. See the Novell iPrint Administration Guidefor instructions on installing, configuring, and customizing iPrint.AXIS Print servers can be installed as iPrint printers, either by usingthe Novell LPR gateway (LPR on IP) or the AXIS GatewayConfiguration Snap-in for iPrint.Axis provides two Snap-ins for iPrint:• AXIS LPR Gateway Configuration• AXIS IPP Gateway Configuration• The Public Access print servers are immediately available for everyone on thenetwork• The Axis Gateway Configuration Utility is an installation and configuration toolfor NDPS printers in the NetWare environment.The Axis Gateway will appear in NetWare 5.1 and later releases. You candownload the Axis Gateway Configuration Utility for use with earlier versions ofNetWare from www.axis.com.• To print using TCP/IP, Axis print server firmware 6.1 or later is required. In orderto print using IPX/SPX, Axis print server firmware 5.51 or later is needed.
