Axis 5570e User Manual

Also see for 5570e: User manual User guide Installation guide User manual

Contents

AXIS 5570e/AXIS 5670e User’s Manual Section 13: SNA Parameter Overview 243Updating parametersThis is most easily done from the internal web pages of your AXIS5570e/AXIS 5670e. To set the parameters using a Web browser, youfirst need to assign an IP address to the AXIS 5570e/AXIS 5670e. Forinstructions on how to do this, refer to Setting the IP address, on page24.Alternatively, you can update the parameters via FTP, TFTP or by usingextended IBM printer emulation.Using extended IBM printer emulation means setting up the AXIS5570e/AXIS 5670e by printing a file containing extended IBMemulation commands to it after you have established communicationwith your IBM host. The configuration is started by inserting thesequence %CONFIG+ in your text. To protect your settings, a passwordmust be provided. By default, the password is pass. You may then setthe parameter values directly using the syntax shown below:Syntax:When all parameters have been set the SAVE command saves thesettings permanently. The %CONFIG- command resumes normalprinting. In order to maintain backward compatibility, someparameters must be preceded by a %CONFIG++ command. See alsoThe Parameter List, on page 295. = [, ];