Section 5: Setting Up - IBM Mainframe (zSeries) AXIS 5570e/AXIS 5670e User’s Manual84Modifying theTCP/IP profileThe TCP/IP profile contains system configuration statements used toinitialize the TCP/IP address space. Among those statements, thefollowing are subject to special considerations when you are printingfrom PSF on TCP/IP-attached printers:• DATABUFFERPOOLSIZE• SMALLDATABUFFERPOOLSIZE• TINYDATABUFFERPOOLSIZE• KEEPALIVEOPTIONS• GATEWAYBelow is an excerpt from an example TCP/IP Profile (not a completeprofile) . Examples of the statements above are printed in bold:Note:ACBPOOLSIZE 1000ADDRESSTRANSLATIONPOOLSIZE 1500CCBPOOLSIZE 150DATABUFFERPOOLSIZE 160 32768ENVELOPEPOOLSIZE 750IPROUTEPOOLSIZE 300LARGEENVELOPEPOOLSIZE 50RCBPOOLSIZE 50SCBPOOLSIZE 256SKCBPOOLSIZE 256SMALLDATABUFFERPOOLSIZE 256TCBPOOLSIZE 512TINYDATABUFFERPOOLSIZE 256UCBPOOLSIZE 100KEEPALIVEOPTIONS INTERVAL 10 SENDGARBAGE FALSE ENDKEEPALIVEOPTIONSGATEWAY; * Network First Hop Linkname Packet Size Subnet mask Subnet value10 = BCPLAN 2000 255.255.255.0 10.10.12.0DEFAULTNET 10.10.12.1 BPCLAN 2000 255.255.255.0 0If you change any of the values in the TCP/IP profile, you must restart TCP/IP toactivate the new settings.
