AXIS 5570e/AXIS 5670e User’s ManualSection 5: Setting Up - IBM Mainframe (zSeries) 67Configuring theAXIS 5570e/AXIS5670eTo perform the instructions presented in this section, you should firstassign an IP address to your AXIS 5570e/AXIS 5670e using one of themethods presented in Setting the IP address, on page 24.The purpose of the configuration of the AXIS 5570e/AXIS 5670e is toemulate a LAN attached IBM 3174 Control Unit running SNA PU2.0.Follow the instructions below to configure the AXIS 5570e/AXIS5670e using a Web browser:1. Start a Web browser, e.g. Internet Explorer or NetscapeNavigator.2. Enter the IP address or the host name of the AXIS 5570e/AXIS5670e in the location field and press the Enter key on yourkeyboard. The internal Web pages of the AXIS 5570e/AXIS 5670ewill appear.Important:3. Click the Configuration Wizard for IBM sessions button.To protect the Admin pages and the Configuration Wizard from unauthorizeduse, enter a password (default Pass) in the Root Password field under Admin |General Settings.
