Section 11: Configuration Possibilities AXIS 5570e/AXIS 5670e User’s Manual234Importing a Certificate When you receive the PEM-encoded certificate from your CertificateAuthority, open the print server’s Web interface and select Admin |Security Settings. Click Import and follow the instructions on thescreen.https:// Whenever SSL/TLS is enabled, you can only reach the print server’sWeb interface through the secure services. The unsecure way viahttp:// is closed and now you have to address the print server’s Webinterface in the secure way, i.e. via https://.Disabling Protocols To further increase security, you must disable protocols that areconsidered insecure;• FTP (used by AXIS ThinWizard. If FTP is disabled, AXIS ThinWizardcan not function properly.)• Telnet• Auto-IP• DHCP• BOOTP• Remote Config (used by AXIS NetPilot)• SNMPv1 ConfigurationTo disable these protocols, go to Admin | Security Settings |Protocol Settings | Detailed View and mark the check boxes. ClickOK to finish. Only enabled protocols will be visible from this view!To enable these protocols, select Admin | Network Settings |Detailed View | TCP/IP for FTP, Telnet, AutoIP, DHCP and BOOTP.Remote Config is enabled via Admin | General Settings | RConfigSupport.
