8-16 Receiving Faxes Chapter 89 Press Set.10 Press Stop to return to standby mode. Ex:nWhen the RX MODE setting is set to NET SWITCH, no other receive mode can beselected with the Receive Mode button.Network Switch System OperationThe procedure for using the network switch system is almost the same as when usingthe unit over a normal telephone line. When you receive calls, however, the unit willrespond slightly differently as described below:When you hear the telephone call ring pattern:Pick up the handset and talk normally. If you hear a slow beep, it means the call is froma fax machine trying to send a fax. Press Start to receive the fax. If you do not pick upthe handset, the unit continues to ring until the other party hangs up. If an answeringmachine is connected, it takes over the call.When you hear the fax call ring pattern (triple ring):After the unit rings, it receives the document automatically.15:00 NET SW.INCOMING RING
