6-8 Speed Dialling Chapter 6Using Coded Speed DiallingTo use this feature, you must first register a number for coded speed dialling.(1 p. 6-6)Follow this procedure to send documents using coded speed dialling:1 Open the document tray.*2 Adjust the document feed lever for thedocument you are loading. (1 p. 4-2)3 Prepare the document and load it, face Ex:down, in the ADF. (1 p. 4-4)• For colour sending, press Colour/B&W (Currently used memory)to turn on its light. (1 p. 7-2)• To adjust the resolution and contrast,1 pp. 7-3, 7-4. (Standby to scan)4 Press Coded Dial.5 Use the numeric buttons to enter the two-digit Ex:code assigned to the number you wish to fax.• The number registered under that coded speed Ex:dialling code is displayed.• If you enter the wrong code, press Stop. Thenpress Coded Dial and enter the correct code.• NO TEL # appears if no fax number isassigned to the coded speed dialling code youentered.6 Press Start to begin scanning for sending, orwait a few seconds for the unit to beginscanning automatically.• If you prefer the unit never to scan adocument automatically after a few seconds,disable the TIME OUT setting. (1 p. 14-6)n• You can also use coded speed dialling to send a document to more than one destinationat a time. (1 p. 7-13)• To dial a telephone number registered for coded speed dialling, simply lift the handset,press Coded Dial, and enter the two-digit code.TEL=03 3758 2111A01ADOCUMENT READYMEMORY USED 0%* Hong Kong, Singapore, and Malaysia only.
