Chapter 2 Setting Up 2-15Setting Up5 Remove the BJ cartridge fromits package, then remove the orangeprotective cap q and tape w.• Discard the cap and tape. Never attemptto reattach them to the BJ cartridge printhead.• Install the BJ cartridge immediately afterremoving the cap and tape.• Spilled ink can stain any surface; protectyourself and your work area.6 With the label facing outwards, insertthe BJ cartridge into the cartridge holder.Lower the blue cartridge lock lever until itlocks into position.7 Press C.• The cartridge holder moves to its homeposition on the right side of the unit andbegins cleaning the BJ cartridge print head.This process takes about 55 seconds.c Do not try to manually move or stopthe cartridge holder since this maydamage the unit.8 Close the printer cover.9 Close the document tray.*nIf you need to unplug the unit, wait until it is in standby mode (time and receive modedisplayed in the LCD). Otherwise the cartridge holder may not be in its home positioncausing the BJ cartridge to remain uncapped and dry out.InkCartridgeBCl-21ColorMade inJapanInkCartridgeBCl-21BlackMade inJapanInkCartridgeBCl-21Made inJapanColorInkCartridgeBCl-21Made inJapanBlackMade in JapanColor BJCartridgeBC-21eDO NOT TOUCHTHESE PRECISIONCOMPONENTS.12* Hong Kong, Singapore, and Malaysia only.
