2-16 Setting Up Chapter 2Loading PaperThis section describes how to load plain paper in the multi-purpose tray so that you canbegin using your unit.For complete details on the different print media you can use, and for instructions onselecting and loading other print media, 1 Chapter 5.Paper Guidelines• Store all print media wrapped and on a flat surface until ready to use. Keep openedpacks in their original packaging, in a cool, dry location.• Store paper at 18°–24°C, 40%–60% relative humidity.• To avoid paper jams and poor print quality, do not print on damp, curled, wrinkled, ortorn paper.• Use cut-sheet paper only, not paper that comes on a roll.• Do not use paper thicker than can be used for the unit (1 p. 5-2). Thick paper cancause damage to the BJ cartridge print head.• Do not load paper beyond the paper limit mark (P) or beyond the tab on the multi-purpose tray. Doing so may cause problems. Also, make sure there are no gaps oneither side of the paper stack.• If the print media has a print side, set it in the multi-purpose tray with the print sidefacing upwards.PAPER LIMIT MARKNO GAPS HERETAB
