CHAPTER 11 INSTALLATIONCOPYRIGHT © 2002 CANON INC. 2000 CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002 11-252.14 Checking the Printer Functions (if equipped with printerfunctions)1) Turn on the machine.2) Press the System key in the control panel, and check to see that the LED of the key hasgone ON. (‘READY’ will be indicated on the display; otherwise, check to be sure thatthe printer board has been mounted properly.)3) Execute the ‘TEST PRINT’ as follows to make sure that printing is normal:• Non-Fax Model1. Press the System key in the control panel (so that the LED of the key goes ON).2. Press the GO key so that the machine will be in off-line state. (‘PAUSE’ will be in-dicated on the display.)3. Press the menu key. (‘TEST MENU’ will be indicated on the display.)4. Select ‘TEST PRINT’ using the Item key, and press the Enter key to start test print-ing.• Fax Model1. Press the Printer key in the control panel (so that the LED of the key goes ON).2. Press the OK key so that the machine will be in off-line state. (‘PAUSE’ will be in-dicated on the display.)3. Press the menu key (F1 key). (‘TEST MENU’ will be indicated on the display.)4. Select ‘TEST PRINT’ using the Item key (F2 key), and press the Enter key (F4 key)to start test printing.4) Check to see that the name and the version of the printer board are indicated on the gen-erated test print.5) Turn off the machine, and connect the network cable.6) Turn on the machine.7) Inform the user’s system administrator that the machine has been installed, and ask him/her to make network settings.
