CHAPTER 13 TROUBLESHOOTINGCOPYRIGHT © 2002 CANON INC. 2000 CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002 13-91#1 SSSW-SW05: standard function settingBit01234567Functionnot usedexecute inch/metric conversion(text mode)execute inch/meter conversion(text/photo, photo mode)transmit bit 33 and thereafter forDIS signalRecording paper length availabilitydeclared in DIS signalLTR/LGL declaration for DISnot usednot used1-executeexecuteprohibitA4 sizedo notdeclare--0-do notexecutedo notexecutedo notprohibitArbitrarysizedeclare--Factory setting00000[Bit 1]Use it to specify inch/meter conversion in sub scanning direction for images read in textmode.If set to ‘1: execute’, the following takes place for binary image data:• Inch-configured image data stored in memory is converted to metric-configured im-age data for transmission to a metric-configured fax machine (e.g., G3 transmission).• Metric-configured image data stored in memory is converted into inch-configuredimage data for transmission to an inch-configured fax machine.The direction of scanning for conversion is in keeping with the setting of bit 2 of SW14.MemoThe machine uses inch-configured reading; however, if bit 4 of SSW14 isset to ‘1: yes’, it will use metric-configured reading.[Bit 2]Use it to specify inch/meter conversion in sub scanning direction for images read in text/photo and photo mode.If bit 1 of SW5 is set to ‘1: execute metric/inch conversion for binary image data’ and, inaddition, if this switch is set to ‘1: execute ‘, the following takes place for halftone imagedata (text/photo, photo mode):• Inch-configured image data stored in memory is converted to metric-configured im-age data for transmission to an metric-configured fax machine (e.g., for G3 transmis-sion).• Metric-configured image data stored in memory is converted to inch-configured im-age data for transmission to an inch-configured fax machine.The direction of scanning for conversion is in keeping with the setting of bit 2 of SW14.
