CHAPTER 13 TROUBLESHOOTINGCOPYRIGHT © 2002 CANON INC. 2000 CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 200213-196#0008 [ TX ] Password does not match for polling transmissionCause:Remedy:During polling that uses a subaddress, the password of the machine and that of theother machine do not match.Match the password of the machine and that of the other party.#0009 [RX] Paper has jammed or the paper has run outCause:Remedy:Cause:Remedy:Cause:Remedy:Cause:Remedy:The paper is trapped.Remove the trapped paper.The paper has run out.Set new paper.The paper cassette is not set correctly.Set the paper cassette.An internal mechanism is faulty.Correct it. (See 3.5 “Troubleshooting Feeding Faults” in Chapter 13.)#0011 [RX] Polling reception errorCause:Remedy:Cause:Remedy:There is no document in the other party.Ask the operator of the other party to set the document correctly.Transmission was attempted, and polling reception was started because the docment was not set correctly.Set the document correctly to transmit.#0012 [TX] The other party has run out of paperCause:Remedy:The other party has run out of recordingpaper.Ask the operator of the other party to set paper.#0018 [TX] Auto dialing transmission errorCause:Remedy:Cause:Remedy:Cause:Remedy:Cause:Remedy:Cause:Remedy:The tone/pulse setting is wrong.Make the correct tone/pulse setting.The connection time for the line is too long.(1) When registering an auto-dial number, put a relatively long pause at the end ofthe telephone number to delay the start of the T0 timer.(2) Increase the T0 timer setting to prevent a time-over condition.The line of the other party was engaged.Start a call once again.The other party is not connected to the line, or is not turned on so that the transmis-sion did not arrive.Ask the operator of the other party to find out the cause.The other party is not a facsimile machine.Check the number of the other party, and start a call once again.
