CHAPTER 13 TROUBLESHOOTINGCOPYRIGHT © 2002 CANON INC. 2000 CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002 13-223##0784 [TX] In ECM transmission, ERR was received after transmission ofEOR-EOMThe line condition is poor, and the other party cannot often receive the image signalcorrectly.(1) Increase the transmission level so that the other party may receive the imagesignal correctly.(2) Adjust the NL equalizer so that the other party may receive the image signalcorrectly.The other party malfunctioned because of an echo.(1) Provide echo remedy 1.(2) Using a manual call, press the Start button after hearing the 1st DIS from theother party.(3) To prevent response to the 1st DIS from the other party, put a relatively longpause to the telephone number when registering an auto-dialing number.(4) Ask the operator of the other party to provide echo remedy 2.(5) Ask the operator of the other party to decrease the transmission level so that theother party will not receive an echo.##0785 [TX] In ECM transmission, no significant signal can be received aftertransmission of EOR-EOP, and the allowed number of proceduresignal re-transmissions was exceededCause:Remedy:Cause:Remedy:The line condition is poor, and the other party cannot receive EOR-EOP correctly.(1) Increase the transmission level so that the other party may receive EOR-EOPcorrectly.(2) Adjust the NL equalizer so that the other party may receive EOR-EOP cor-rectly.(3) Add an echo protect tone to the V.29 modem signal for transmission.The line condition is poor, and the significant signal cannot be received correctly.Ask the operator of the other party to increase the transmission level so that the sig-nal may be received correctly.##0787 [TX] In ECM transmission, DCN was received after transmission ofEOR-EOPThe line condition is poor, and the other party cannot receive EOR-EOP correctly.(1) Increase the transmission level so that the other party may receive EOR-EOPcorrectly.(2) Adjust the NL equalizer so that the other party may receive EOR-EOP cor-rectly.(3) Add an echo protect tone to the V.29 modem signal for transmission.The Stop key was pressed during a communication.Transmit once again.Cause:Remedy:Cause:Remedy:Cause:Remedy:Cause:Remedy:
