CHAPTER 13 TROUBLESHOOTINGCOPYRIGHT © 2002 CANON INC. 2000 CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 200213-423.4.3 Pickup operation fails. (cassette)Main motor (M101)1) Is ‘E010’ (fault in main motor) indicated?YES: See the descriptions for ‘E010’ in 6.2.1.Machine state2) Is the pickup roller rotating?NO: Go to step 6.Paper3) Is the cassette fitted correctly?NO: Replace the cassette.Pickup roller4) Is there wear or cracking in the surface of the pickup roller?YES: Replace the pickup roller.Pickup drive assembly gear5) Is there damage/foreign matter on the gear of the pickup rollerdrive assembly?YES: If damage is found, replace the gear. If foreign matter is found,remove it.Cassette pickup solenoid (SL: 151)6) Are the connection and the wiring between the connector (J906) ofthe cassette pickup sensor and the connector (J106) on the DCcontroller PCB normal?NO: Correct the connection or the wiring.Cassette pickup solenoid, DC controller PCB7) Does the cassette pickup solenoid operating normally?NO: Replace the cassette pickup solenoid.Cassette controller PCB (if 2-cassette type)8) Try replacing the cassette controller PCB. Is the fault corrected?YES: End.DC controller PCB, Image processor PCB9) Try replacing the DC controller PCB. Is the fault corrected?YES: Replace the DC controller PCB.NO: Replace the image processor PCB.
