COPYRIGHT © 2002 CANON INC. 2000 CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 20021-22CHAPTER 1 INTRODUCTIONNo. Key/LED name Description[1] Counter key Use it to check the counter status.[2] Contrast key Use it to adjust the contrast of the control panel screen.[3] System switch key Use it to switch the system.[4] Monitor key Use it to check the communication status.[5] Reset key Use it to use default copy mode settings.[6] Numeric keypad Use it enter a telephone number, number of copies to make, orthe like.[7] Clear key Use it to clear registered items/settings.[8] Energy Save key Use it to turn off the power save mode.[9] Directory key Use it to call up a destination registered for one-touch or speeddialing.[10] Coded Dial key Use it to access speed dialing.[11] Hook key Use it to turn on the speaker.[12] Pause/Redial key Use it to add a pause in a telephone number. Or, use it to dialthe most recently dialed number.[13] Tone/R key Use it as the R key on a 230V model; or, as the Tone key on a120V model.[14] Line/Mail key Use it to select a line.[15] Direct TX key Use it to start direct transmission.[16] One-Touch panel Use it for one-touch dialing.[17] Stop key Use it to stop an ongoing transmission or copying operation.[18] Main Power LED Use it to see if the main power is on.[19] Start key Use it to start a transmission or copying operation.[20] ID key Use it to make settings in ID mode.[21] Error indicator Use it to see if any error has occurred on the printer.[22] */# key Use it to enter a fax telephone number or F code.[23] Communication Status LED Use it to check access to the HDD (flashing) while the tele-phone line is in use or to see if memory reception is under way(remaining on).[24] Interrupt key Use it to turn on or off interrupt copying.[25] Additional Functions key Use it to bring up the User Mode Settings screen.[26] OK key Use it to check registered items/settings.[27] Back key Use it to return to the previous screen.[28] Screen Select key Use it to select a function indicated on the display.[29] Control panel LCD Use it to bring up various settings screens.[30] Special Features key Use it to make settings for special features (page separation,frame erasing, binding margin, reduced page composition).[31] Copy Short-Cut key Use it to select a registered copy short-cut function (default: 1,reduce; 2, enlarge; 3, page separate; 4, frame erase).[32] Sort key Use it to turn on sort copy when making copies using an ADF.
