COPYRIGHT © 2000 CANON INC. 2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000CHAPTER 4 IMAGE FORMATION SYSTEM4-30 P3.5.4 OthersCOPIER>ADJUST>HV-TR>TR-N1(Use it to adjust the output of the transfer charging current for the first sideof a double-sided print or for a single-sided print of plain paper.)COPIER>ADJUST>HV-TR>TR-N2(Use it to adjust the output of the transfer charging current for the secondside of a duplexing print of plain paper.)Enter the value indicated on the service label if the RAM on the DC con-troller PCB has been cleared.COPIER>ADJUST>HV-TR>HVT-TR(Use it to enter the offset value for the transfer high-voltage output of thehigh-voltage unit.)Enter the value indicated on the label attached to the new high-voltage unitif the RAM on the DC controller PCB has been cleared or the high-voltageunit has been replaced.COPIER>ADJUST>HV-TR>D-HV-TR(Use it to enter the offset value for the thermistor high-voltage output of theDC controller PCB.)Enter the value on the label attached to the DC controller PCB if the RAMon the DC controller PCB has been cleared or the DC controller PCB hasbeen replaced.COPIER>FUNCTION>CLEANING>WIRE-CLNExecute auto cleaning of the charging wire (five round trips) if the primarycharging wire or the transfer charging wire has been replaced.COPIER>OPTION>BODY>W-CLN-PSet the interval at which auto cleaning of the charging wire is executed interms of the number of prints.Download Free Service Manual at http://printer1.blogspot.com
