COPYRIGHT © 2000 CANON INC. 2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000CHAPTER 5 SERVICE MODE5-83 TCOPIER>OPTIONCOUNTER5Use it to change the type of soft counter 5 of the control panel to suit theneeds of the user or the dealer.Settings 000 to 804 (T05-601-01; default, 000)COUNTER6Use it to change the type of soft counter 6 of the control panel to suit theneeds of the user or the dealer.Settings 000 to 804 (T05-601-01; default: 000)DATE-DSPUse it to switch how the date is displayed.Caution For the 120V model, the default is ‘1’.Settings 0: YYYY MM/DD (default), 1: DD/MM YYYY, 2: MM/DD/YYYYMB-CCVUse it to impose limits on the Box function by the Control Card IV (CC-IV).Settings 0: enables control and printing regardless of presence/absence of cardin remote; in remote, makes no change1: enables control and printing regardless of presence/absence of cardin remote; accepts print job, but stops printing in absence of card(with card, enables printing but imposes charge; default)2: disables control in remote; does not accept print job in remoteB4-L-CNTUse it to specify whether B4 sheets are counted as large size or small sizefor soft counters 1 through 6.Settings 0: small size (default), 1: large sizeTRAY-STPUse it to prohibit suspension of printing by imposing limits to the numberof sheets to staple or mixing of sizes of the finisher.Settings 0: normal mode (suspend printing by count/size; default)1: suspend printing if height sensor is ON (full of paper)MF-LG-STUse it to turn on the Extra Length key for sheets up to 630 mm (free inmanual feed); the 630 mm limit also applies to the ADF.Settings 0: normal mode (default), 1: extra length mode (key indicated)SPECK-DPUse it to enable/disable indication of a warning for dust detection in streamreading.Settings 0: disable indication (default), 1: enable indicationDownload Free Service Manual at http://printer1.blogspot.com
