COPYRIGHT © 2000 CANON INC. 2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000CHAPTER 8 PAPER DECK8-35 P3.3.5 Removing the Lifter Cable (rear of the deck)1) Open the compartment of the deck, andremove all paper.2) Remove the screw, and detach the paperrear guide plate from inside the com-partment.3) Push the paper supply position sensor[1] found inside the compartment withyour finger to move down the lifter untilthe left/right hole in the compartmentside plate and the left/right hole in thelifer match; then, insert two long screw-drivers [2]. At this time, try matchingthe top surface of the lifter with themarking on the left side plate of thecompartment to facilitate the work.4) Remove the compartment. (See p. 8-27P.)5) Remove the screw [3], and detach thesensor plate [4].6) Remove the screw [5], and detach theupper/lower sensor cover [6].7) Disconnect the five connectors [7], andremove the five screws [8]; then, detachthe metal plate [9].F08-303-10F08-303-11F08-303-09[1][2][8][8][3][4][9][8][7][5][6]Download Free Service Manual at http://printer1.blogspot.com
