COPYRIGHT © 2000 CANON INC. 2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000CHAPTER 5 SERVICE MODE5-50 TMaking Fine Adjustments for Copy Density Auto CorrectionIf you have cleared the RAM on the DC controller PCB, enter the settings indicated onthe service label.DENS-ADJUse it to correct the density of images (copier/printer).If images are foggy or high-density areas are faint, correct the F-value table.Range of 1 to 9 (default: 5)adjustmentAdjusting the Non-Image WidthIf you have cleared the RAM on the DC controller PCB, enter the value indicated on theservice label.BLANK-TUse it to enter the image leading edge non-image width adjustment value.Range of 1 to 500adjustmentBLANK-BUse it to enter the image trailing edge non-image width adjustment value.F05-401-07WhiteCopy densityBlack WhiteF9 F1A lower settingdecreases foggingA higher settingdecreases faintnessOriginal densityCOPIER>ADJUSTDownload Free Service Manual at http://printer1.blogspot.com
