COPYRIGHT © 2000 CANON INC. 2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000CHAPTER 6 FIXING SYSTEM6-28 P4.3.2 Mounting the Main/Sub HeaterMount the fixing heater by reversing thesteps used to remove it while keeping thefollowing in mind:a. Do not touch the surface of the heater.b. Orient both heaters so that the side withthe longer harness is toward the front.c. Mount the main heater [1] to the rightand the sub heater [2] to the left (view-ing from the front of the fixing assem-bly).d. Stagger the heater so that its protrusionwill not interfere.e. When mounting the faston of the fixingheater at the rear, be sure that the fastonterminals (A, B) do not face the outside;rather, they must be parallel with theholder.F06-403-054.3.3 Removing the Thermal Switch1) Remove the fixing assembly form themachine.2) After detaching the fixing web, removethe two screws [1], and detach the oilpan [2] and the fixing harness cover [3].F06-403-06[2] [1][1] [1][3][2]ABF06-403-04Download Free Service Manual at http://printer1.blogspot.com
