COPYRIGHT © 2000 CANON INC. 2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000CHAPTER 4 IMAGE FORMATION SYSTEM4-68 P7) Cut off the excess of the charging wirewith nippers.8) Pick the end of the charging wire ten-sion spring with tweezers, and hook iton the charging power supply electrode.In the case of the pre-transfer chargingassembly, hook the spring on the pin atthe front.F04-708-05Make sure of the following:• The charging wire must notbe bent or twisted.• The charging wire must befitted in the V-groove of thecharging wire positioner.F04-708-069) Attach a cushoin in front of the charg-ing wire. (This does not apply to theprimary charging assembly.)10) Mount the shielding plate (left, right).For other charging assemblies,mount the two lids.11) Mount the wire cleaner. At this time,pay attention to make sure that the wirecleaner is oriented correctly.12) Wipe the charging wire with lint-freepaper moistened with alcohol.CorrectCorrectWrongWrongGrid sideDownload Free Service Manual at http://printer1.blogspot.com
