COPYRIGHT © 2000 CANON INC. 2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000CHAPTER 4 IMAGE FORMATION SYSTEM4-63 P7.7 Transfer/Separation Charging Assembly7.7.1 Removing the Transfer/Separation Charging Assembly1) Open the front cover, and slide out thefixing/feeding unit.2) Remove the feeding right front cover.3) Remove the mounting screw [1], anddetach the fixing guide [2].F04-707-014) Disconnect the connector [3], and slideout the transfer/separation charging as-sembly [4] to the front; then, detach itby pulling it up at an angle.F04-707-027.7.2 Mounting the Transfer/Separation Charging AssemblyMount the transfer/separation charging assembly by reversing the steps used to remove itwhile keeping the following in mind.1) Make sure that the four protrusions [1]on the transfer/separation charging as-sembly are correctly fitted into the cut-offs [2] in the fixing/feeding unit.F04-707-03[1][2][3][4][1][1] [1][1]Download Free Service Manual at http://printer1.blogspot.com
