COPYRIGHT © 2000 CANON INC. 2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000CHAPTER 5 SERVICE MODE5-97 T6) Make the following selections in service mode:COPIER>TEST>NETWORK>PING; then, enter the loop back address*(127.0.0.1), and press the OK key and then the Start key.• If ‘NG’ is indicated, the machine has a problem with the TCP/IP settings; go back to step 3), and check the settings.• If ‘OK’ is indicated, the machine’s TCP/IP settings may be consideredto be free of a problem. However, the connection of the network interface board (NIC) or the NIC itself may have a problem. Go to step 7) tomake a check.*The address will be returned before it reaches the NIC, allowing a checkon the machine’s TCP/IP settings.7) Make the following selections in service mode:COPIER>TEST>NETWORK>PING; then, enter the local host address(i.e., the machine’s IP address), and press the OK key.• If ‘NG’ is indicated, the NIC connection or the NIC itself is faulty.Check the NIC connection or replace the NIC.• If ‘OK’ is indicated, the machine’s network settings and NIC may beconsidered to be free of problems. However, the environment of the usernetwork may be faulty. Report to the system administrator, and ask forcorrection.COPIER>TESTDownload Free Service Manual at http://printer1.blogspot.com
