0 About this Manual0.3 Sources6 DS7 Soft starter 09/16 MN03901001Z-EN www.eaton.com0.3 Sources[1] Profile Drive Technology, PROFIdrive Technical Specification forPROFIBUS and PROFINET, Version 4.1, May 2006; Order No: 3.1720.4 Target groupThe content of the manual is written for engineers and electricians. Aspecialist knowledge of electrical engineering is needed for commissioning.The chapter “SmartWire-DT” is intended for automation technicians andengineers. Detailed knowledge of the field bus systems used is presumed.In addition you should be familiar with the handling of the SmartWire-DTsystem.￫ More information on the devices described here can be found onthe Internet under:http://www.eaton.eu/Europe/Electrical/ProductsServices/AutomationControl/SwitchingProtectingDrivingMotors/SoftStarters/DS7/as well ashttp://www.eaton.de/EN/EatonDE/ProdukteundLoesungen/Electrical/Kundensupport/DownloadCenter/index.htm￫ Customer support ￫ Download Center – DocumentationIn the Quick Search box, enter the document name(MN03901001).
