8 SmartWire-DT8.2 Profiles for DS7-SWD146 DS7 Soft starter 09/16 MN03901001Z-EN www.eaton.com8.2 Profiles for DS7-SWDTable 24: Profiles for DS7-SWD soft startersAcyclic data transfers to DS7-SWD soft starters are possible with all profilesas per the “Base Mode Parameter Access” profile.8.3 1-0-A switchSoft starters belonging to the DS7-SWD series feature a 1-0-A switch thatcan be used to manually switch the soft starter on and off.Figure 114: Control section with mains contactora Connection for SmartWire-DT external device plugb LED: SmartWire-DT diagnostic LEDc Data interface for PKE32-COMd 1-0-A switchProfile Name Description1 DS7-SWD PKE1 PKE profile 1, start/stop bit for DS72 DS7-SWD PKE2 PKE profile 2, start/stop bit for DS73 DS7-SWD PKE3 PKE profile 3, start/stop bit for DS74 DS7-SWD PKE1-8Bit PKE profile 1, control data for the DS7 in one extra byte (command)at the end of the frame5 DS7-SWD PKE2-8Bit PKE profile 2, control data for the DS7 in one extra byte (command)at the end of the frame6 DS7-SWD PKE3-8Bit PKE profile 3, control data for the DS7 in one extra byte (command)at the end of the frame7 DS7-SWD PKE1-PD 2x16Bit PKE profile 1, control data for the DS7 in two extra words(one-word command, one-word analog value) at the end of the frame8 DS7-SWD PKE2-PD 2x16Bit PKE profile 2, control data for the DS7 in two extra words(one-word command, one-word analog value) at the end of the frame9 DS7-SWD PKE3-PD 2x16Bit PKE profile 3, control data for the DS7 in two extra words(one-word command, one-word analog value) at the end of the frame10 DS7-SWD 8Bit Control data for the DS7 in a single extra byte (command) withoutPKE11 DS7-SWD PD 2x16Bit Control data for the DS7 in two extra words(one-word command, one-word analog value) without PKE1 A0①④③②
