8 SmartWire-DT8.6 Interoperability148 DS7 Soft starter 09/16 MN03901001Z-EN www.eaton.com8.6 Interoperability8.6.1 GatewaysThe DS7-SWD soft starter’s interoperability is guaranteed with the followingSmartWire-DT gateway firmware versions (and higher):Table 25: Firmware versions of SmartWire-DT gateways8.6.2 Fieldbus description filesThe DS7-SWD’s interoperability is guaranteed with the following versions(and later versions) of the fieldbus description files for the correspondinggateway:Table 26: Compatible DS7-SWD fieldbus description files8.6.3 SWD-AssistThe SWD-Assist program provides valuable support in the engineering ofyour SmartWire-DT topology. SWD-Assist is software that runs underoperating systems Windows 2000 (SP 4), Windows XP, Windows Vista(32-bit) or Windows 7 and relieves you of the planning work required for anSWD topology. DS7-SWD soft starters can be used in SWD-Assist versionV 1.60 and higher.SmartWire-DT gateway Firmware VersionEU5C-SWD-CAN V 1.20EU5C-SWD-DP V 1.20￫ The firmware of the SmartWire-DT gateway can be updatedusing the SWD-Assist program. This program, as well as therequired firmware versions, can be downloaded for free on theInternet at:http://www.eaton.de/EN/EatonDE/ProdukteundLoesungen/Electrical/Kundensupport/index.htm￫ Customer support ￫ Download Center – SoftwareSmartWire-DT gateway Description fileEU5C-SWD-CAN EU5C-SWD-CAN_V120.edsEU5C-SWD-DP (Intel-based CPU) Moed14.gsdEU5C-SWD-DP (Motorola-based CPU) MoeId14.gsd￫ These and other fieldbus description files can be found on theInternet at:http://www.eaton.de/EN/EatonDE/ProdukteundLoesungen/Electrical/Kundensupport/index.htm￫ Customer support ￫ Download Center – Software
