9 Appendix9.1 StandardsDS7 Soft starter 09/16 MN03901001Z-EN www.eaton.com 2159 Appendix9.1 StandardsThe relevant standards for the DS7 soft starters are listed below:Table 45: Standards and EMC9.2 Applicable product standards and approvalsUL certificationAll sizes of soft starters from the DS7 series are now UL certified:Certificate Number 20120406-E251034Report Reference E251034-20110330Issue Date 2012-APRIL-06Learn more: www.UL.com .Standard type Standard Titles Limit ValuesModel IEC/EN 60947-1 (EN 60529) IP20Interference immunity IEC/EN 60947-4-2 Electrostatic discharge 8 kV air discharge4 kV ContactdischargePerformance criterion 2Electromagnetic fieldsFrequency range 80 to 1000 MHz10 V/1 mPerformance criterion 1High frequency fieldFrequency range 0.15 to 80 MHz, 80 %amplitude modulated140 dB (μV)Performance criterion 1Fast transients,Burst on power terminals2 kV/5 kHzPerformance criterion 2Burst on bus and control cables 1 kV/5 kHzPerformance criterion 2Surge voltage test, supply cable 2 kV phase - earth1 kV phase - phasePerformance criterion 2Immunity testing for voltage dips, briefinterruptions, and voltage fluctuationsDS7-340…: Performance criterion 1DS7-342…: Performance criterion 2DS7-34D…: Performance criterion 2Emitted interference IEC/EN 60947-4-2 Radio interference, housing and supplysystemClass A for use in industrial environmentInsulation resistance IEC/EN 60947-1 Insulation resistance test Appendix KPermissible pollution IEC/EN 60947-1 Insulation of air and creepage distances Degree of pollution 2Permissible humidity rating IEC/EN 60947-1 Relative humidity 85 %, no condensationDocument type NameProduct standard EN/IEC 60947-4-2Approvals • UL (UL 508)• CSA (CSA C22.2 No 14-05)• CCC (GB 14048.6)• Gost• Gost-RMarkings • CE marking for LVD (Low-Voltage Directive)• EMC (Electromagnetic compatibility - EMC Directive)
