8 SmartWire-DT8.4 AbbreviationsDS7 Soft starter 09/16 MN03901001Z-EN www.eaton.com 147The 1-0-A switch’s positions are as follows:• 1: DS7-SWD soft starter is switched on• 0: DS7-SWD soft starter switched off• A: switching command via SmartWire-DT8.4 AbbreviationsThe following abbreviations are used throughout this chapter:8.5 SmartWire-DT response timeThe DS7-SWD soft starter’s response time on a SmartWire-DT system isabout 150 ms. When there are two stations, the response time will increaseby about 50 ms; when there are 50, by about 400 ms.￫ The overload relay function (ZMR) will only be active in the 1-0-Aswitch’s A position. The overload relay function will be disabledin positions 1 and 0.Abbreviation MeaningACKR Acknowledge requiredTH Drive ObjectEU5C-SWD-CAN SmartWire-DT gateway for connecting to a CANopen masterEU5C-SWD-DP SmartWire-DT gateway for connecting to a PROFIBUS masterGSD Device master dataID IdentifierPDU Protocol Data UnitPLC Programmable Logic ControllerPNU Parameter NumberPROFIBUS Process Field BusRFG Ramp function generatorPLC(S) programmable logic controllerSmartWire-DT SmartWire-DT
