GE MAC 2000 Operator's Manual

Also see for MAC 2000: Operator's manual Service manual Reference guide

• LANC (for communicating with a CardioSoft/CS system)• LANM (for communicating with a MUSE systemFor more information on setting up LAN communication, see 12.13 Options Setup on page 151.2. Verify the LAN cable is connected properly to the LAN connection slot.For information on where the LAN cable connects to the device, see 2.2.1.2 Rear View on page 33.3. Check the communication setup to verify whether the IP, Netmask, Gateway, and DNS addressesare all correct.For details on checking addresses, see 12.5 Communication Setup on page 127.15.4.3 Cannot Transmit Records Via WLAN (Silex WirelessBridge)If you receive an error while attempting to transmit records via Silex Wireless Bridge, use the followingprocedure:1. Verify the correct communication option was activated.The system supports two options for communicating over WLAN using Silex Wireless Bridge:• LANC (for communicating with a CardioSoft/CS system)• LANM (for communicating with a MUSE system)For more information on setting up LAN communication, see 12.13 Options Setup on page 151.2. Verify the ethernet cable is connected properly to the ethernet port of the Silex Wireless Bridge andthe other end of the ethernet cable to ethernet port of the MAC2000 device.For information on where the Silex Wireless Bridge connects to the device, see 2.2.1.2 RearView on page 33.3. Check communication setup to verify whether the IP, netmask, gateway, and DNS serveraddresses are all correct.For details on checking addresses, see 12.5 Communication Setup on page 127.15.4.4 Cannot Transmit Records via Embedded WirelessModuleIf you receive an error while attempting to transmit records via the embedded wireless module, use thefollowing procedure:1. Verify the correct communication option was activated.The system supports two options for communicating over a wireless network using the embeddedwireless module:• WIFC for communicating with a CardioSoft/CS system• WIFM for communicating with a MUSE systemFor more information on setting up LAN communication, see 12.13 Options Setup on page 151.2. Check communication setup to verify whether the IP, netmask, gateway, and DNS serveraddresses are all correct.For details on checking the IP addresses, see 12.5 Communication Setup on page 127.Operator Manual 15.4 Import/Export/Save Errors2053535-002 Revision T MAC 2000 ECG Analysis System 174/198