GE MAC 2000 Operator's Manual

Also see for MAC 2000: Operator's manual Service manual Reference guide

NOTEA dialog window will open before the system enters into the selected Power up modeas set in System settings.• The BCRD option in the Option Code window indicates that the USB Barcode Reader support isactivated.The following sections describe how to navigate from the Power up screen to the Main Menu for theeach possible logon configuration. Use the procedure that applies to your logon configuration settings.• If your system is configured to power up in the Resting ECG mode, go to 2.3.1 Resting ECG PowerUp Mode on page 41.• If your system is configured to power up in the Arrhythmia mode, go to 2.3.2 Arrhythmia Power UpMode on page 42.• If your system is configured to power up in the Main Screen mode, go to 2.3.3 Main Screen PowerUp Mode on page 42.• If your system is configured to power up in the Stress ECG mode, go to 2.3.4 Stress ECG Power UpMode on page 43.• If your system is configured to power up in the Order Manager mode, go to 2.3.5 Order ManagerPower Up Mode on page 43.2.3.1 Resting ECG Power Up ModeThis procedure describes how to navigate to the Main Menu after powering on the system whenResting ECG is selected for Power up mode in Basic Setup.NOTEIf you need to perform system setup functions, be sure you log in as a user who is assignedsetup editing privileges.If the system is configured for Resting ECG Power Up Mode and High Security Mode is not enabled,the Resting ECG screen opens on power up. To go to the Main Menu, press More > Main Menu.Operator Manual 2.3 Navigating the User Interface2053535-002 Revision T MAC 2000 ECG Analysis System 41/198