Item Description1 Product description2 Country of origin3 SymbolsSee 1.5.14.2 Symbol Descriptions on page 20 for a description of the symbols used on this label.4 Electrical rating of the device5 Manufacturer name and address1.6.4 Product CodesThe product code identifies specific system platforms.You can identify the product code using the serial number listed on the product label located in one ofthe following places:• On the product label attached to the device.• On the product label provided with the application CD.For software application systems, you can view the serial number by launching the system applicationand clicking Help > About.For information on launching the application, refer to the service or operator's manual for this system.1.7 Service InformationThis section provides information pertaining to the maintenance and servicing of the system.Familiarize yourself with this information before requesting service from GE Healthcare or its authorizedrepresentatives.1.7.1 Service RequirementsFor systems with hardware provided by GE Healthcare, failure on the part of the responsible individual,hospital, or institution using this equipment to implement a satisfactory maintenance schedule mayresult in equipment failure and possible safety hazards.For software only products, maintenance of the hardware and operating system on which the softwareresides is the responsibility of the customer.Regular maintenance, irrespective of usage, is essential to ensure that the components of this systemare always functional when required.1.7.2 Warranty InformationThis device is considered GE Healthcare-supplied hardware. Only authorized GE Healthcare servicepersonnel should service the device. Any unauthorized attempt to repair equipment under warrantyvoids that warranty. It is the user's responsibility to report the need for service to GE Healthcare or toone of their authorized agents.Operator Manual 1.7 Service Information2053535-002 Revision T MAC 2000 ECG Analysis System 29/198