GE Multilin N60 Network Stability and Synchrophasor Measurement System 5-1355 SETTINGS 5.6 GROUPED ELEMENTS5Figure 5–55: PHASE UNDERVOLTAGE1 SCHEME LOGICc) PHASE OVERVOLTAGE (ANSI 59P)PATH: SETTINGS GROUPED ELEMENTS SETTING GROUP 1(6) VOLTAGE ELEMENTS PHASE OVERVOLTAGE1The phase overvoltage element may be used as an instantaneous element with no intentional time delay or as a definitetime element. The input voltage is the phase-to-phase voltage, either measured directly from delta-connected VTs or as cal-culated from phase-to-ground (wye) connected VTs. The specific voltages to be used for each phase are shown below. PHASE OVERVOLTAGE1PHASE OV1FUNCTION: DisabledRange: Disabled, EnabledMESSAGE PHASE OV1 SIGNALSOURCE: SRC 1Range: SRC 1, SRC 2, SRC 3, SRC 4, SRC 5, SRC 6MESSAGE PHASE OV1PICKUP: 1.000 puRange: 0.000 to 3.000 pu in steps of 0.001MESSAGE PHASE OV1 PICKUPDELAY: 1.00 sRange: 0.00 to 600.00 s in steps of 0.01MESSAGE PHASE OV1 RESETDELAY: 1.00 sRange: 0.00 to 600.00 s in steps of 0.01MESSAGE PHASE OV1 BLOCK:OffRange: FlexLogic™ OperandMESSAGE PHASE OV1TARGET: Self-resetRange: Self-reset, Latched, DisabledMESSAGE PHASE OV1EVENTS: DisabledRange: Disabled, EnabledPHASE UV1FUNCTION:PHASE UV1BLOCK:PHASE UV1 SOURCE:PHASE UV1 MODE:PHASE UV1PICKUP:PHASE UV1CURVE:PHASE UV1DELAY:PHASE UV1MINIMUM VOLTAGE:Disabled = 0Off = 0Source VT = DeltaPhase to Ground Phase to PhaseRUNRUNVCG or VCA PICKUPVBG or VBC PICKUPVAG or VAB MinimumVBG or VBC MinimumVCG or VCA MinimumSource VT = WyeVAG VABVBG VBCVCG VCAEnabled = 1VABVBCVCAPHASE UV1 A PKPPHASE UV1 B PKPPHASE UV1 C PKPPHASE UV1 PKPPHASE UV1 A DPOPHASE UV1 B DPOPHASE UV1 C DPOPHASE UV1 A OPPHASE UV1 B OPPHASE UV1 C OPPHASE UV1 OPANDSETTINGSETTINGSETTINGSETTINGSETTINGSETTINGFLEXLOGIC OPERANDSFLEXLOGIC OPERANDFLEXLOGIC OPERAND827039AB.CDRANDANDANDOROR<<<<<}tVttVVVAG or VAB PICKUP<RUNPHASE UV1 DPOFLEXLOGIC OPERANDAND
