GE Multilin N60 Network Stability and Synchrophasor Measurement System 6-256 ACTUAL VALUES 6.4 RECORDS6The OLDEST SAMPLE TIME represents the time at which the oldest available samples were taken. It will be static until the loggets full, at which time it will start counting at the defined sampling rate. The NEWEST SAMPLE TIME represents the time themost recent samples were taken. It counts up at the defined sampling rate. If the data logger channels are defined, thenboth values are static.Refer to the COMMANDS CLEAR RECORDS menu for clearing data logger records.6.4.4 PHASOR MEASUREMENT UNIT RECORDSPATH: ACTUAL VALUES RECORDS PMU RECORDSThe number of triggers applicable to all the phasor measurement unit recorders is indicated by the NUMBER OF TRIGGERSvalue. The status for each of the six phasor measurement unit recorders is indicated as follows:PATH: ACTUAL VALUES RECORDS PMU RECORDS PMU 1(6) RECORDING PMU RECORDSNUMBER OF TRIGGERS:0Range: 0 to 65535 in steps of 1MESSAGE PMU 1 RECORDING See below.MESSAGE PMU 2 RECORDING See below.↓MESSAGE PMU 6 RECORDING See below. PMU 1 RECORDINGPMU 1 FORCE TRIGGER:YesRange: No, YesMESSAGE PUM 1 AVAILABLERECORDS: 0Range: 0 to 65535 in steps of 1MESSAGE PUM 1 SECONDSPER RECORD: 0.0Range: 0 to 6553.5 in steps of 0.1MESSAGE PUM 1 LAST CLEARED:2005/07/14 015:40:16Range: date and time in format shown
