GE Multilin N60 Network Stability and Synchrophasor Measurement System 8-178 SECURITY 8.3 ENERVISTA SECURITY MANAGEMENT SYSTEM83. Modify the user access rights by checking or clearing one or more of the fields shown.The access rights are described in the following table4. Click OK to save the changes to user to the security management system.Table 8–2: ACCESS RIGHTS SUMMARYFIELD DESCRIPTIONDelete Entry Checking this box will delete the user when exiting the user management configuration window.Actual Values Checking this box allows the user to read actual values.Settings Checking this box allows the user to read setting values.Commands Checking this box allows the user to execute commands.Event Recorder Checking this box allows the user to use the digital fault recorder.FlexLogic Checking this box allows the user to read FlexLogic™ values.Update Info Checking this box allows the user to write to any function to which they have read privileges. When any ofthe Settings, Event Recorder, and FlexLogic boxes are checked by themselves, the user is granted readaccess. When any of these are checked in conjunction with the Update Info box, they are granted read andwrite access. The user will not be granted write access to functions that are not checked, even if the UpdateInfo field is checked.Admin When this box is checked, the user will become an EnerVista URPlus Setup administrator, thereforereceiving all of the administrative rights. Exercise caution when granting administrator rights.
