6 - WPT PAGES123Airport ApproachesAirport Approach PageThe Airport Approach Page shows the availableapproach procedures for the selected airport. Wheremultiple initial approach fixes (IAFs) and feeder routesare available, that information may also be displayed.A map image provides a layout diagram for eachapproach and transition.If a WAAS approach has been selected, the WAASapproach ID is displayed in the top left corner of themap. The approach service level is shown in the lowerright corner of the map. Service level annunciationsavailable are: LPV, L/VNAV, LNAV+V, or LNAV.Identifier, Symboland TypeMap ImageApproachProcedure NameFourth Page inWPT GroupTransitions: IAFs,Feeder Routes andVectors-to-FinalWAASapproachIDWAAS service levelTo scroll through the available approaches andtransitions:1. Press the small right knob to activate thecursor.2. Turn the large right knob to place the cursoron the APPROACH procedure name field.3. Turn the small right knob to display a windowof available approaches for the selected airport.Continue turning the small right knob toselect the desired approach.With the cursor on the“APPROACH” name field, turn the small rightknob to select the desired procedure andpress ENT.4. Press ENT. The cursor moves to the transitions(TRANS) field.5. Turn the small right knob to display a windowof available transitions. Continue turningthe small right knob to select the desiredtransition or select “VECTORS” for guidanceonly along the final course segment of theapproach.With the cursor on the “TRANS” field, turnthe small right knob to select the desiredtransition. Select “VECTORS” for guidanceonly along the final course segment of theapproach.6. Press ENT. To remove the flashing cursor, pressthe small right knob.