4 - FLIGHT PLANS69the “Cross-Side” field, then turn the smallright knob to select “To” or “From”. PressENT to confirm the selection.7. Turn the large right knob to highlight “Initi-ate Transfer?” and press ENT to transfer theselected data.Once “Initiate Transfer?” is selected, a progress bar at thebottom of the page indicates the status of the crossfill transferuntil completed.Copying Flight PlansCopy Flight Plan? allows you to copy the selectedflight plan to a new flight plan location. The copyfunction is useful for duplicating an existing flight planbefore making changes.If you wish to save a flight plan currently locatedin “flight plan 00”, copy it to an open catalog location(1-19) before the flight plan is cancelled, overwrittenor erased.Use the “Copy Flight Plan?” option to savea copy of a flight plan to another memorylocation. This is useful for saving the activeflight plan, or to save a stored flight planbefore editing.NOTE: Once a flight plan is activated, it is copied to“flight plan 00” and overwrites the previous contentsof the flight plan memory location.To copy a flight plan to another Flight Plan Cata-log location:1a. From the Active Flight Plan Page: press MENUto display the Active Flight Plan Optionswindow.or1b. From the Flight Plan Catalog: press the smallright knob to activate the cursor, turn thelarge right knob to highlight the flight planyou wish to copy, then press MENU to displaythe Flight Plan Catalog Options.2. Turn the large right knob to highlight “CopyFlight Plan?” and press ENT.3. By default, the next empty catalog locationis offered. To select a different location, turnthe large right knob to select the flight plannumber, use the small and large right knobsto enter a different number and press ENT.4. With “Yes?” highlighted, press ENT to copythe flight plan.Flight Plan Catalog Options